Laminate flooring installation Guide

If installing on top of a  new concrete floor wait until the floor is fully cured. Using a pry bar and hammer, carefully remove all base molding (if necessary) and place it out of the way. You do not need to be present however it is vital to check the product delivered to site matches what you believe you purchased. Check for colour, size and grade based on the order provided to the retailer. The installer may have no idea what colour was selected, it’s better to resolve an issue before install rather than walking into a massive surprise when you return. Leave clear instructions on accepted trim placements and contact details if the installer encounters problems at the site.
Any gap exceeding 3mm over a 3metre span is typically too uneven for timber flooring installation. At Hybrid Floors Australia, we love making your journey engineered wood flooring as stress-free as possible. That’s why we’ve partnered with local Brisbane flooring installation experts, backed by over 20 years of experience and QBCC reassurance. From ordering online to installing your new floors, we’ve got it covered. Plus, their showroom features hundreds of hybrid flooring options — from classic oak finishes to contemporary greys — all under one roof.

This article provides all the necessary information and explains why subfloor preparation is essential for long-lasting, beautiful floors. All existing flooring materials & the subfloors require inspection & possible repairs or leveling prior to any new installation. Certain flooring products can be installed over  existing floors if they are flat, dry and secure, installation guidelines provide the necessary steps to deliver a quality outcome. It’s important to remember an old floor that squeaks and moves under normal foot traffic will still squeak & move under foot traffic if no repairs or levelling is conducted at the site.
This will help to fill in any small scratches to the seal, which act to make the floor look dull or lusterless. Wooden floors in commercial areas which may often become contaminated with grease from food, sweat, or residue from other sources may require additional, more intense, cleaning. As you approach the wall on the far side of the room, it becomes difficult to use the flooring nailer. Once you don’t have enough room to swing the mallet, begin drilling pilot holes for face-nailing, but nail only when you have laid down all the boards. Where the flooring meets a jog in the wall or a similar obstacle, cut corners to fit.

Although thinner than traditional hardwood, hybrid flooring offers excellent durability, making it a great choice for both residential and commercial spaces. The hybrid material consists of multiple layers, with a stone polymer core and vinyl top layer with commercial-grade wear layer, all situated upon an integrated premium underlay. Legacy is a stunning laminate flooring range that also encapsulates the authentic, natural beauty and complexity of a real timber floor. We protect your floor with an Aquashield™ which is effective against spills for up to 48 hours. Moreover, this scratch and dent resistant surface is perfect for busy homes, especially ones with high foot traffic if you have children or frequent visitors.
Due to the fact that we produce multiple panels, not just a few like many smaller companies, we have economies of scale. This allows us to negotiate better pricing with our suppliers, and pass the cost savings to our customers. Doing direct printing to the majority of ACM panels also gives us the ability to produce fast, with instant curing of the ink, ready to go straight to the lamination process.

Additionally, their reflective surface can enhance lighting in interior spaces. You'll need to cut away the center, remove the edges carefully, trim the tongue off the replacement board, and glue it in place. While it's possible to DIY, I usually recommend getting a pro for this job. I've seen too many DIY attempts end up damaging the surrounding boards.
Whether it’s a floating timber floor or a direct stick system, we’ll make sure it’s done to spec and doesn’t cause any issues with your building. If you want the timber look without the cost, laminate is a solid option. It’s made from a high-density core with a timber-look surface. It’s easy to clean and hard-wearing, so it works well in busy households or rentals. Laminate floors  to synthetic floors and engineered floors, We do it all! We have an experienced team of floor sanding experts who are skilled at working on all kinds of wooden floors and can help restore your polished wooden floors’ shine.

We kindly ask our customers to ensure they or an authorized representative are present at the delivery location at the specified time to avoid these additional costs. Any extra charges will be communicated and agreed upon prior to the second attempt of delivery. Use a laminate plank as a height guide, flip it upside down, and trim the bottom of the door frame with a multi-tool.This allows the laminate to slide neatly underneath for a clean, professional finish. The subfloor must be flat, dry, clean, and solid to ensure a proper installation.
Whether you’re updating your home or working on a business project, our team is here to guide you every step of the way. Our flooring installation team in Alexandria are true professionals who will see your project installed perfectly. With  over a decade of experience, we’ve seen it all and can guarantee no job is too big or too small for our team. Whether it’s the robust natural aesthetic of an engineered timber floor, the timeless appeal of solid timber flooring, or the cost-effective versatility of a floating floor, we have you covered. The cost will depend on the type of timber you choose and the size of the room or rooms in which you’re installing it.